UM:Dvo Effects Dvo DryClean

From DigitalVision
Revision as of 15:39, 3 April 2018 by Alastair (talk | contribs)

Jump to: navigation, search

Darrow-up.png     Previous Next

DVO Dry Clean
From Release : 2016.1
2016.1 R2 (Float/HDR)
2018.1 New Features


DVO Dry Clean is an advanced dust, dirt and film blemish concealer.


Ch-dvo-dryclean-ui.png

DVO Dry Clean supports integer and floating point sources.
NOTE: Floating point is supported from version 2016.1 R2.

ch-dvo-chroma-enable

Use the Enable button to enable/disable the effect.

Detect

ch-dvo-dryclean-detect

The basic detection settings select whether to locate Dark and/or Bright objects in the film.

Dark Dust

This will search for dark dust speckles and blotches. In RGB mode (see below) it will look for issues with an RGB negative offset.

Bright Dust

This will search for light dust speckles and blotches. In RGB mode (see below) it will look for issues with an RGB positive offset.

Advanced Analysis

ch-dvo-dryclean-advanced-analysis

This sets a level of how much extra analysis will be performed after a detection.

It will do a thorough search around the hit and try and find soft edges or thin scratches.

Higher values will take longer and increase the risk of false positives.

Mode

ch-dvo-dryclean-mode

Luma Do analysis in luminance mode.
RGB Do analysis in RGB mode.

RGB mode is slower.

HDR

ch-dvo-dryclean-hdr

High Dynamic Range (HDR) processing can be enabled using the HDR Source button.

This is only valid when the tool is using an OpenEXR source and in float processing mode.

Processing
Strength

ch-dvo-dryclean-strength

The Strength parameter sets the overall cleaning threshold. Good results should be achieved using processing values between 0 - 1.

A value of 1.0 uses a simplified estimation of the clip noise/grain level. For values above 1.0, Dry Clean can further process the media to brush off grain or noise.

Values 0 - 2.0
Default 1.0
Aggressiveness

ch-dvo-dryclean-aggressiveness

Aggressiveness sets how far and how strongly Dry Clean will attempt to conceal problem areas and taking into account the risks involved (with complex material.

Values 0 - 1.0
Default 0.75


Super Aggressive

Dvo-dryclean super aggressive.png

From Release : 2018.1

This will force processing detected dust even if considered unsafe. This limits many of the safety algorithms.

Ensure Smoothness

ch-dvo-dryclean-smoothness

When enabled, Smoothness will smooth harsh edges that might appear as a result of the concealment process.

Smoothness Amount

ch-dvo-dryclean-smoothness-amount

This defines how much the Smoothness will affect a harsh edge within the concealment.

Values 0 - 1.0
Default 0.5
Safety
Temporal Safety

ch-dvo-dryclean-temp-safe

Temporal Safety will prevent false positives where unexpected objects appear or disappear in the image.

Values 0 - 1.0
Default 0.25
Cut Safety

Dvo-dryclean cut safety.png

From Release : 2018.1

Cut Safety will reduce false positives around scene cuts by increasing the safety algorithms on the nearby frames.

The Mode option lets you choose to enable or disable this safety setting, or decide to not process the frame nearest the scene cut.

Range 0-1.0
Disable 0.75

The Mode can be :

Disabled Normal processing at scene cuts
Enabled Cut safety Enabled. Default
Bypass First and last frame of scene will not be processed.
Flash Protection

Dvo-dryclean flash protection.png

From Release : 2018.1

Default : Disabled

Turn off processing if a flash frame is detected.

Examples include camera flashes in news reels or VFX shots that globally alter the luminance level for single frames.


Darrow-up.png     Previous Next