UM:Application Preferences Colour

From DigitalVision
Jump to: navigation, search

Darrow-up.png     Previous Next

Colour

app-prefs_project-prefs-colour-layout

 

The Colour preferences screen specifies global configuration settings controlling colour related controls and display.

Trackball Orientation

This specifies the orientation used for the colour-correction trackballs, both on the control panel and the GUI interface.This configures the colour arrangement on the trackball.

 

Values :

Vector. Offset, Offset 30, Offset 330

Default :

Vector

 

dv_note

Offset corresponds to the old Rank system

 

As you change this setting the trackball image next to the drop-down will update, indicating the current colour orientation :

app-prefs_prefs-colour-tb-vector

app-prefs_prefs-colour-tb-offset

app-prefs_prefs-colour-tb-offset-30

app-prefs_prefs-colour-tb-offset-330

 

dv_note

The Trackball Orientation setting also appears in the Control Panel preferences screen.

Printer Points Per F-Stop

app-prefs_project-prefs-colour-pp-f-stop

 

Range :

User set

Default :

8

 

This setting specifies the number of printer points used to represent an f-stop for the printer lights tool.

Positive

With the Positive setting enabled, the number you enter will add colour. Uncheck Positive to remove colour.

Printer Neutral

app-prefs_project-prefs-colour-printer-neutral

 

Range :

User set

Default :

25

 

This value represents no change in the printer lights settings.

Default Layer Show Mode

app-prefs_project-prefs-colour-layer-show

 

Values :

Red,Green,Blue,Cyan,Magenta,Yellow,White,Black,Grey,Saturated

Default :

Grey

 

Values :

Inside Area, Outside Area

Default :

Outside Area

 

These settings correspond to :

 

Show As
Show Area (In/Out)

 

in the Router settings for each CC/Effect layer.

Default Keyer Input

app-prefs_project-prefs-colour-keyer-input

 

Values :

Previous, Base, Start

Default :

Start

 

This configures which layer a Keyer effect will use as input and corresponds to the layer Router setting Key Input.

 

Start - use input of Base Layer as input
Base - use output of Base Layer as input
Previous - use previous layer as input

Compare Diff Threshold

This is the threshold below which compare mode differences will not be registered. A higher value means we are less sensitive to difference.

 

Range :

User set

Default :

5 units

Default Colour Scaling

app-prefs_project-prefs-colour-scaling

 

This parameter controls the default scaling mode used on a new project. See Project Colour Scaling.

 

 

Darrow-up.png     Previous Next