Support:AJAVideo

From DigitalVision
Revision as of 11:37, 24 June 2016 by Alastair (talk | contribs)

Jump to: navigation, search

AJA Video

Overview

From Release : 2014.2

Digital Vision Nucoda, Phoenix and Loki support the AJA Kona 3G and Kona 4 video boards.

Support :

  • 2014.2 - monitoring only
  • 2015.2 - monitoring and layoff
  • 2016.1 - monitoring, layoff and capture

We support AJA models :

  • Kona 3G - PCIe x4
  • Kona 4 - PCIe x8

See also :

If you experience problems setting up video modes or see unexpected output, check the application console for useful information.

Connections

The basic I/O connections are shown below. Further detail can be found in the AJA documentation.

Kona-connections.png

SDI

The default AJA connections are two inputs (1,2) and two outputs (3,4).

For standard formats (SD,HD) we use the two output ports only (3,4). For 4K and UHD monitoring requirements, we use all four ports :

SD / HD formats : SDI 3 + SDI 4
4K / UHD formats : SDI 1 + SDI 2 + SDI 3 + SDI 4
Stereo Left eye = SDI 3

Right eye = SDI 4

RGB mode in stereo needs 3g (level b) connection. No 4K with stereo.

HDMI

  • The Kona 3G supports 2K over HDMI
  • The Kona 4 supports 4K over HDMI
    • From version 2015.2, there is an option to downscale 4K to 2K for output via HDMI. This is for users with HDMI displays that do not support 4K.
  • Stereo over HDMI is not supported (left eye output only)

4K

4K modes are output over all four SDI ports as quad segments :

Kona-4k-quad-sdi-segments.png

12 Bit Modes

Support :

  • 2014.2 - Support 12 bit output in dual-link mode and it is not available for 4K or stereo.
  • 2015.1 - as 2014.2
  • 2015.2 - RGB 12-bit output is available via 3G level B-DL as well as dual-link and is thus supported for stereo and 4K content.

Audio

Audio is embedded in SDI and HDMI outputs as well as the AJA AES/EBU outputs.

Up to the maximum of 8 channels supported by the Digital Vision applications.

Timecodes

LTC and VITC timecodes are embedded in SDI output and LTC timecode is also output via the dedicated LTC output.

Driver / Firmware

See the Drivers page for details on AJA Driver and Firmware versions.

The Digital Vision application bundles the tested and supported AJA driver installer. The AJA installer runs when you select Install AJA Kona video driver in the Digital Vision application install options.

You may also be prompted to update the card firmware. You should proceed with this update.

Restart your system to complete the installation.

Check Installation

Once restarted, check the installation.

AJA have a package version and a driver version (which may be different). See the AJA Drivers page for details of packages and versions installed.

Driver

Check that the AJA driver has been updated :

  • My Computer / Right-Click : Device Manager
  • Sound, video and game controllers

    Aja-device-manager.png

  • Select the AJA video device, right-click : Properties
    • Driver Version
    • Driver tab

      Aja-device-props.png

For driver version, see the AJA Drivers page.

Firmware

Check that you are using the right firmware mode and change if necessary.

  • Open the AJA Control Panel
  • Select the Firmware tab (on left)
  • If you need to use 4K modes, make sure you select the 4K Mode :

    Aja-kona-firmware-mode.png

Implementation

For more detail on the AJA Video implementation, see :